1000L Semi-Plastic Composite IBC Tank

Semi-Plastic Composite IBC Tank

Galvanized steel frame + anti-aging anti-UV HDPE tank for durability
4-way semi-plastic composite pallet fits pallet trucks/forklifts
UN-compliant + heavy metal ≤100ppm for safe compliant handling
DN150 sealed filling opening + DN50 ball valve ensure leak-proof use
Reusable recyclable design (steel reinforcement for easy recycling) cuts costs
Galvanized steel + HDPE resist moisture, mildew and corrosion

Item	Specification
Brimful Capacity	1060 (Liter)
Nominal Capacity	1000 (Liter)
Length	1200 (mm)
Width	1000 (mm)
Height with pallet	1145 (mm)
Filling opening	150 (mm)
Discharge opening	50 (mm)
Fork opening	100 (mm)
Label plate	2 (piece)
Corner Protector	4 (piece)
Weight (Inner container)	14.5 ± 0.5 (kg)
Total Weight (approx)	55 ± 1 (kg)
Note	Technical subjects to change, all dimensions approximately

Category	Specific Description	Material
Outer Container	Rectangular grid box made of tubular Steel material, with bottom plate, connected with tie-bar (assembled with brackets); label plate with manual on front side, additional label plate on the back side	Grid / Bottom plate: Steel (galvanized); Corner Protector: 4 pieces (PE-HD)
Inner Container	Rectangular blow molded tank with filling opening in the middle of the top section, discharge opening at the bottom of the front side; contain anti-aging and anti-UV plastic particles	High density polyethylene (PE-HD), natural
Filling Opening	DN150 with external thread, closed with screw cap, G2-plug with vent, sealing-cap and gasket	Screw cap (DN150): PE-HD (red); O-ring gasket: EPDM; G2-plug: PP; O-ring of 2 inch gasket: EBA (natural); Vent: Silastic
Discharge Opening	DN50 Screw Ball Valve/Butterfly Valve with yellow/blue handle and safety ring; outlet sealed with PE-lined Al-film (secured with clip), closed with screw cap, PE-disk and flat-gasket; outlet nozzle enclosed	Ball Valve/Butterfly Valve: PE-HD (white); Flap-gasket/Spherical gasket: EPDM/ETFE; Screw cap (DN50): PE-HD (black); Flat-gasket (screw cap): PE (form); PE-disk: PE-HD (red); Outlet nozzle: PE-HD (natural)
Pallet	Steel-frame pallet (1000 x 1200 mm), 4-way entry	Steel frame
Notice Plate	Size: 500*380mm; label plate with manual on front side, additional label plate on the back side	Steel (galvanized)
Heavy Metals Requirement	Concentration level of heavy metals (Pb, Cd, Cr VI and Hg) in packaging	Not exceed 100ppm
UN-marking	–	UN 31 HA1
Delivery State	–	Ready for filling

Maximum load capacity per container: 2027kg (single unit).
Maximum static stacking load: 4038kg – under normal static storage conditions, 3 additional layers can be stacked on the base layer (total 4 layers).
Double-layer maritime shipping limit: Technically 1.8x the single-container capacity (2027kg × 1.8 = 3648kg); we recommend a safer 1.65x ratio to mitigate transit risks. (The recommended 1.65x loading ratio for maritime shipping is a proactive measure to address potential uncertainties (e.g., vessel movement, turbulence during ocean transport), ensuring cargo safety and avoiding damage.)

Disclaimer: The above load specifications are based on standard testing conditions and are applicable to UN-certified IBCs only, when used, filled, stacked, and transported in accordance with relevant UN regulations, applicable standards, and Jieyuan’s technical guidelines.